Page Comparison

...

Generic instructions: connecting to eduroam

1. Go to device settings.

2. Select Connections. Note: this section of Settings may not be listed on your Android device, depending on the manufacturer. If not please select Wi-Fi or the equivalent menu option on your device.

   Image Added

3. Select Wi-Fi.

   Image RemovedImage Added

4. Select the eduroam network.

   Image Removed
5. Image Added

   In the pop-up menu, make sure the EAP method is PEAP and Phase 2 authentication is set to MSCHAPV2.

   Image Removed

6. If required, set the CA certificate to Do not validate

   Image Removed

7. is set to PEAP.

8. Image Added

   Type in your username into the the Identity field field as: YourNCSSMUsername@ncssm.edu. Make sure to leave Anonymous Identity blank.

   Image Removed

   Image Added

9. Type in your NCSSM password into the Password in the Password field.

   Image Removed

10. Click Connect.

    Image Removed

11. field.

12. Image Added

    Set the CA certificate type to Do not validate.

13. Image Added

    Click Advanced. Note: on your device you may not have an “Advanced” section, in which case you should be able to select the Phase 2 Authentication option listed below on the main connection screen.

14. Image Added

    Make sure the Phase 2 authentication is set to MSCHAPV2 and that the Anonymous Identity is blank.

    Image Added

15. Click Connect.

16. You should now be connected to the eduroam network.

    Image Added

If you follow these instructions and still cannot connect, please contact ITS.

...