Page Comparison

Use the following instructions to connect to and disconnect from NCSSM's wireless (Wi-Fi or WiFi) network eduroam from your Android device.

Instructional video: connecting to eduroam

Android eduroam instructional video

Generic instructions: connecting to eduroam

1. Go to device settings.

2. Select Connections. Note: this section of Settings may not be listed on your Android device, depending on the manufacturer. If not please select Wi-Fi or the equivalent menu option on your device.

1. Image Added

2. Select Wi-Fi.

1. Image Added

2. Select the eduroam network.

1. Image Added

   In the pop-up menu, make sure the EAP method is set to PEAP.

1. Image Added

   You may be prompted for a “Domain”. If so, please type ncssm.edu.

2. Type in your username into the Identity field as: YourNCSSMUsername@ncssm.edu.

1. Image Added

2. Type in your NCSSM password into the Password field.

1. Image Added

   Set the CA certificate type to 

1. Use system certificates.

1. Image Added

2. Click Advanced. Note: on your device you may not have an “Advanced” section, in which case you should be able to select the Phase 2 Authentication option listed below on the main connection screen.

1. Image Added

   Make sure the Phase 2 authentication is set to MSCHAPV2 and that the Anonymous Identity is blank.

1. Image Added

2. Click Connect.

3. You should now be connected to the eduroam network.

1. Image Added

If you follow these instructions and still cannot connect, please contact ITS.

Instructions for disconnecting from eduroam

See https://support.google.com/android/answer/9075847?hl=en under Remove. In step 4, select the eduroam network connection.

If you follow these instructions and still cannot disconnect, please contact ITS

.