Page Comparison

...

Use the information below to log into each bird-dog.

1. Choose the A/V menu.

2. Choose NDI Decode tab.

3. Use the grey pull-down menu to select the correct source.

4. Click the Apply button.
   

   Image Modified

Troubleshooting

1. You should see an IP address or something similar in the “Current IP address” window. If not,

2. Click the Refresh button. Wait a moment and see if the IP address shows up.

...

To livestream from the auditorium

1. Login to Birddog-mini-6 (Seneca Scribe Primary Input)

   1. IP address is: 10.10.0.35

   2. set the source to: “BIRDDOG-AUDITORIUM-CAM (CAM)”

2. Login to Birdog-mini-7 (Seneca Scribe Secondary Input)

   1. IP address is: 10.10.0.36

   2. Set source to: “BIRDDOG-MINI-1 HDMI” (this is the auditorium lectern)

3. Login to Symetrix Audio Control

   1. IP address is: 172.31.252.161

   2. Set audio preset to “Auditorium Livestream”

To livestream from the Lecture Hall

1. Login to Birddog-mini-6 (Seneca Scribe Primary Input)

   1. IP address is: 10.10.0.35

   2. set the source to: “BIRDDOG-LECTURE-CAM (CAM)”

2. Login to Birdog-mini-7 (Seneca Scribe Secondary Input)

   1. IP address is: 10.10.0.36

   2. Set source to: “BIRDDOG-MINI-3 HDMI” (this is the lecture hall lectern)

3. Login to Symetrix Audio Control

   1. IP address is: 172.31.252.161

   2. Set audio preset to “Lecture Hall Livestream”

...

1. 1. preset

...

To setup a camera shot

On the Dell computer, you should see a preview of the camera. If not (add instructions here)

...

Current Auditorium Presets

1. Wide shot

2. Lectern